The easy wipe-on low lustre finish for all types of wood. Enhances the beauty of all timbers and gives a natural look. For use on bare wood or wood that has been stained with rustin's wood dye.
Danish oil is a special formulation, developed by rustins based on tung oil, also known as chinese wood oil.
Can also be used on exterior wood but is not recommended for oak. The special ingredients used in the manufacture of Danish Oil penetrate deep into all types of timber, drying to a hard, durable and water resistant seal. Unlike varnishes it does not leave a thick film on the surface which may peel, chip or craze on ageing. The oil dries quickly in 4 to 6 hours, depending on ambient temperature and humidity, producing a non tacky surface. It does not, therefore pick up dust as will wood treated with linseed oil. Absolutely no skill is required for application, as even when the oil is applied with a brush, it does not have to be brushed out in the same way as a varnish. The brush is merely used to spread the oil liberally over the surface. Danish Oil will bring out the beauty of all timbers and give a natural open-grained soft lustrous finish. The natural colour of the wood may be altered by staining with Rustin's Wood Dye before applying Danish Oil. The Wood Dye can also be added to Danish Oil to make a tinted oil.
|
